MR-J2S-10A Bộ điều khiển động cơ Servo Driver Mitsubishi 3 pha 220VAC
Phần mềm cấu hình hệ thống Servo Driver: MR-J2S Servo Driver
Thông số kỹ thuật: Bộ điều khiern động cơ Servo Driver MR-J2S
| Servo amplifier model MR-J2S- | 10A | 20A | 40A | 60A | 70A (-UM) |
||
| Converter unit model | — | ||||||
| Servo amplifier | Control circuit power supply | Voltage/frequency | 1-phase 200 to 230VAC 50/60Hz | ||||
| Permissible voltage fluctuation | 1-phase 170 to 253VAC | ||||||
| Permissible frequency fluctuation | ±5% maximum | ||||||
| Power consumption (W) | 50 | ||||||
| Main circuit power supply | Voltage/frequency (Note 1) | 3-phase 200 to 230VAC 50/60Hz or 1-phase 230VAC 50/60Hz (Note 2) |
|||||
| Permissible voltage fluctuation | 3-phase 200 to 230VAC: 170 to 253VAC 1-phase 230VAC: 207 to 253VAC |
||||||
| Permissible frequency fluctuation | ±5% maximum | ||||||
| Control system | Sine-wave PWM control/current control system | ||||||
| Dynamic brake | Built-in (Note 3) | ||||||
| Safety features | Overcurrent shutdown, regeneration overvoltage shutdown, overload shutdown (electronic thermal), servo motor overheat protection, encoder fault protection, regeneration fault protection, undervoltage/sudden power outage protection, overspeed protection, excess error protection | ||||||
| Position control mode | Maximum input pulse frequency | 500kpps (when using differential receiver), 200 kpps (when using open collector) | |||||
| Positioning feedback pulse | Resolution per encoder/servo motor rotation: 131072 p/rev | ||||||
| Command pulse multiple | Electronic gear A/B multiple, A: 1 to 65535 or 131072, B: 1 to 65535 1/50 < A/B < 500 | ||||||
| Positioning complete width setting | 0 to ±10000 pulses (command pulse unit) | ||||||
| Excess error | ±2.5 rotations | ||||||
| Torque limit | Set by parameters or external analog input (0 to +10VDC/maximum torque) | ||||||
| Speed control mode | Speed control range | Analog speed command 1:2000, internal speed command 1:5000 | |||||
| Analog speed command input | 0 to ±10VDC/rated speed (Note 4) | ||||||
| Speed fluctuation rate | ±0.01% maximum (load fluctuation 0 to 100%) 0% (power fluctuation ±10%) ±0.2% maximum (ambient temperature 25°C±10°C [77°F±50°F]), when using analog speed command |
||||||
| Torque limit | Set by parameters or external analog input (0 to +10VDC/maximum torque) | ||||||
| Torque control mode | Analog torque command input | 0 to ±8VDC/maximum torque (input impedance 10 to 12kΩ) | |||||
| Speed limit | Set by parameters or external analog input (0 to ±10VDC/rated speed) | ||||||
| Structure | Self-cooling open (IP00) | ||||||
| Environ- ment | Ambient temperature | 0 to 55°C (32 to 131°F) (non freezing), storage: –20 to 65°C (–4 to 149°F) (non freezing) | |||||
| Ambient humidity | 90% RH maximum (non condensing), storage: 90% RH maximum (non condensing) | ||||||
| Atmosphere | Indoors (no direct sunlight); no corrosive gas, inflammable gas, oil mist or dust | ||||||
| Elevation | 1000m (3280ft) or less above sea level | ||||||
| Vibration | 5.9m/s2 maximum | ||||||
| Mass (kg [lb]) | 0.7 (1.5) | 0.7 (1.5) | 1.1 (2.4) | 1.1 (2.4) | 1.7 (3.7) | ||
| Converter unit | Main circuit power supply | Voltage/frequency (Note 1) | — | ||||
| Permissible voltage fluctuation | — | ||||||
| Permissible frequency fluctuation | — | ||||||
| Control circuit power supply | Voltage/frequency | — | |||||
| Permissible voltage fluctuation | — | ||||||
| Permissible frequency fluctuation | — | ||||||
| Power consumption (W) | — | ||||||
| Mass (kg [lb]) | — | ||||||
MR-J2S-A1-Model Configurations-Cau Hinh Bo Dieu Khien Servo Driver
MR-J2S-A-Peripheral Equipment-Ket noi bo dieu khien Servo Driver
Tài liệu chi tiết : Hệ thống bộ điều khiển động cơ Servo MR-J2S
=======================
DACO – Thiết bị Tự động hóa Mitsubishi – Bộ điều khiển lập trình PLC, Biến tần, Bộ điều khiển Servo và Động cơ Servo
Website: www.dacovn.com
Hotline: 0904 182 235/ 0962 28 0880
HotEmail: thuypham@dacovn.com
