Thursday , 20 June 2019
Sản Phẩm Mới
MR-J2S-40A Bộ điều khiển động cơ Servo Driver Mitsubishi 3 pha 220VAC

MR-J2S-40A Bộ điều khiển động cơ Servo Driver Mitsubishi 3 pha 220VAC

MR-J2S-40A Bộ điều khiển động cơ Servo Driver Mitsubishi 3 pha 220VAC

Phần mềm cấu hình hệ thống Servo Driver: MR-J2S Servo Driver

Thông số kỹ thuật: Bộ điều khiern động cơ Servo Driver MR-J2S

Servo amplifier model MR-J2S- 10A 20A 40A 60A 70A
(-UM)
Converter unit model
Servo amplifier Control circuit power supply Voltage/frequency 1-phase 200 to 230VAC 50/60Hz
Permissible voltage fluctuation 1-phase 170 to 253VAC
Permissible frequency fluctuation ±5% maximum
Power consumption (W) 50
Main circuit power supply Voltage/frequency (Note 1) 3-phase 200 to 230VAC 50/60Hz or
1-phase 230VAC 50/60Hz (Note 2)
Permissible voltage fluctuation 3-phase 200 to 230VAC: 170 to 253VAC
1-phase 230VAC: 207 to 253VAC
Permissible frequency fluctuation ±5% maximum
Control system Sine-wave PWM control/current control system
Dynamic brake Built-in (Note 3)
Safety features Overcurrent shutdown, regeneration overvoltage shutdown, overload shutdown (electronic thermal), servo motor overheat protection, encoder fault protection, regeneration fault protection, undervoltage/sudden power outage protection, overspeed protection, excess error protection
Position control mode Maximum input pulse frequency 500kpps (when using differential receiver), 200 kpps (when using open collector)
Positioning feedback pulse Resolution per encoder/servo motor rotation: 131072 p/rev
Command pulse multiple Electronic gear A/B multiple, A: 1 to 65535 or 131072, B: 1 to 65535 1/50 < A/B < 500
Positioning complete width setting 0 to ±10000 pulses (command pulse unit)
Excess error ±2.5 rotations
Torque limit Set by parameters or external analog input (0 to +10VDC/maximum torque)
Speed control mode Speed control range Analog speed command 1:2000, internal speed command 1:5000
Analog speed command input 0 to ±10VDC/rated speed (Note 4)
Speed fluctuation rate ±0.01% maximum (load fluctuation 0 to 100%)
0% (power fluctuation ±10%)
±0.2% maximum (ambient temperature 25°C±10°C [77°F±50°F]), when using analog speed command
Torque limit Set by parameters or external analog input (0 to +10VDC/maximum torque)
Torque control mode Analog torque command input 0 to ±8VDC/maximum torque (input impedance 10 to 12kΩ)
Speed limit Set by parameters or external analog input (0 to ±10VDC/rated speed)
Structure Self-cooling open (IP00)
Environ- ment Ambient temperature 0 to 55°C (32 to 131°F) (non freezing), storage: –20 to 65°C (–4 to 149°F) (non freezing)
Ambient humidity 90% RH maximum (non condensing), storage: 90% RH maximum (non condensing)
Atmosphere Indoors (no direct sunlight); no corrosive gas, inflammable gas, oil mist or dust
Elevation 1000m (3280ft) or less above sea level
Vibration 5.9m/s2 maximum
Mass     (kg [lb]) 0.7 (1.5) 0.7 (1.5) 1.1 (2.4) 1.1 (2.4) 1.7 (3.7)
Converter unit Main circuit power supply Voltage/frequency (Note 1)
Permissible voltage fluctuation
Permissible frequency fluctuation
Control circuit power supply Voltage/frequency
Permissible voltage fluctuation
Permissible frequency fluctuation
Power consumption (W)
Mass     (kg [lb])

 

MR-J2S-A1-Model Configurations-Cau Hinh Bo Dieu Khien Servo Driver

MR-J2S-A1-Model Configurations-Cau Hinh Bo Dieu Khien Servo Driver

MR-J2S-A-Peripheral Equipment-Ket noi bo dieu khien Servo Driver

MR-J2S-A-Peripheral Equipment-Ket noi bo dieu khien Servo Driver

Tài liệu chi tiết : Hệ thống bộ điều khiển động cơ Servo MR-J2S

=======================

DACO – Thiết bị Tự động hóa Mitsubishi – Bộ điều khiển lập trình PLCBiến tầnBộ điều khiển Servo và Động cơ Servo

Website: www.dacovn.com

Hotline: 0904 182 235/ 0962 28 0880
HotEmail: thuypham@dacovn.com